Updating Changelog

CHANGELOG.md

@@ -4,68 +4,37 @@ All notable changes to this project will be documented in this file.
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.1.0/).
 
-## [0.17.3] - 2026-09-15
+## [Unreleased]
 
-### Changed
+### Added
-- Removed the `lunarphp/stripe` dependency in favour of depending on `stripe/stripe-php` directly.
+- Customer-portal backend groundwork — no routes/controllers/views yet (a storefront-facing UI is
-  `Modules\Core\Payment\Drivers\StripePaymentDriver` had already replaced every bit of Lunar's own
+  3dealer's job once a frontend designer picks it up), but the boboko-owned services it needs to
-  Stripe payment flow (checkout, webhook processing) with its own — all that remained load-bearing
+  call now exist:
-  from the package was raw API-client access, amount conversion, and a correlation table, none of
+  - `Modules\Core\Auth\Services\UserOtpService::validate()` now actually logs the shopper in
-  which are Lunar-specific. Added first-party replacements: `Modules\Core\Payment\Support\
+    (`Auth::login()`, `web` guard) — previously it only returned the `User` model with no session
-  StripeManager` (API client + `toStripeAmount()`/`fromStripeAmount()`), `Modules\Core\Payment\
+    established and no route/controller anywhere ever called it (the checkout page's "Login" tab
-  Models\StripePaymentIntent` (now with a proper `context` array cast, replacing manual
+    was a disabled placeholder). `Auth::login()` alone is enough to merge/associate any active
-  `json_encode`/`json_decode`), and `Modules\Core\Payment\Http\Middleware\
+    guest cart too — it fires `Illuminate\Auth\Events\Login`, which Lunar's own
-  StripeWebhookMiddleware`. Added `database/migrations/..._create_stripe_payment_intents_table.php`,
+    `Lunar\Listeners\CartSessionAuthListener` (registered unconditionally in core, no opt-in
-  a first-party copy of the vendor migration (guarded with `Schema::hasTable()` so it's a no-op on
+    needed) already reacts to, honoring `config('lunar.cart.auth_policy')` (`'merge'` by default).
-  any environment that already has the table from the vendor package's own earlier migration run,
+    An earlier draft of this also called `Cart::associate()` directly from this service — removed
-  and only actually creates it on a genuinely fresh install). No behavior change for consuming
+    as redundant and actually wrong: it ran a second, separate association with a hardcoded
-  apps — same table, same driver contract, same webhook endpoint.
+    `'merge'` policy that ignored whatever a consumer had actually set `auth_policy` to. Also fixed
-
+    an unbounded brute-force window: a 6-digit code (1M combinations, was guessable for its full
-## [0.17.2] - 2026-09-15
+    10-minute expiry with no attempt cap) now invalidates itself after 5 wrong guesses
-
+    (`users.otp_attempts`, new column), forcing a fresh code request rather than leaving a live one
-### Fixed
+    guessable indefinitely.
-- `Modules\Core\Order\Listeners\ApplyResolvedPaymentStatus` never advanced `Order::status` past
+  - `Modules\Core\Auth\Events\CustomerLoggedIn` — dispatched on every successful OTP login (new
-  `awaiting_payment` on a capture — only `paid`/`paid_at` were written, so a fully captured order
+    user or returning), for a storefront to hook into (e.g. post-login redirect, analytics).
-  could sit indefinitely at "awaiting payment" until a staff member manually clicked "Update
+  - `Modules\Core\Customer\Services\CustomerAccountService` — the storefront-facing "My Account"
-  Status". Now, on `PaymentCaptured` (not `PaymentAuthorized` — an authorization isn't yet
+    API (mirrors `CartService`/`CheckoutService`'s shape): `orders()` (paginated, placed orders
-  captured funds), `status` advances to the next step in the order's flow
+    only), `order()`, `addresses()`, `createAddress()`/`updateAddress()`/`deleteAddress()`,
-  (`Modules\Core\Order\Services\OrderStatusFlow::nextOptions()`) — but only when it's still
+    `updateProfile()`. Every method is scoped to the given user's own
-  exactly `awaiting_payment`, so a duplicate/delayed capture event never regresses an order staff
+    `latestCustomer()` — there is no method that accepts a bare order/address id without also
-  already moved further.
+    requiring the owning user, so a controller built on top of this can't leak one customer's data
-- The backoffice "Capture" action on the order page (Filament) called vendor Lunar's
+    to another by trusting a client-supplied id alone (verified live: a second customer attempting
-  `Lunar\Models\Transaction::capture()` directly, which resolves `Lunar\Facades\Payments` — an
+    to read/edit the first's address or order gets `AddressNotFoundException`/
-  entirely separate, unused driver registry — and never dispatched `Modules\Core\Payment\Events\
+    `OrderNotFoundException`, not the record).
-  PaymentCaptured`. This meant a manual capture from the admin panel never ran this app's own
-  payment pipeline at all (including the status-advance fix above). `Modules\Core\Order\Filament\
-  Extensions\OrderActionsExtension` (renamed from `OrderRefundActionsExtension`, since it now
-  fixes both the refund and capture header actions — see below) now routes capture through
-  `Modules\Core\Payment\Support\TransactionDriverAdapter::capture()`, the same app-level path
-  checkout-time captures use.
-- `Modules\Core\Payment\Drivers\StripePaymentDriver` never extracted a card's brand/last four
-  digits from Stripe's response, so `Lunar\Models\Transaction::card_type`/`last_four` were always
-  empty and the admin's "Payment of :amount on card ending :last_four" activity-log line rendered
-  with no digits — reproduced on both checkout-time and manual captures. Added
-  `cardMetaFromIntent()`, reading `payment_method_details` off the PaymentIntent's `latest_charge`
-  (same source `lunarphp/stripe`'s own `StoreCharges` uses), populated into `PaymentResult::$meta`
-  from `resultFromIntent()` and `capture()`. `Modules\Core\Order\Services\TransactionRecorder`
-  now maps `meta['card_type']`/`meta['last_four']` onto the `Transaction` row. Only applies to
-  transactions recorded after this change — existing rows are not backfilled.
-
-### Changed
-- `Modules\Core\Order\Filament\Extensions\OrderRefundActionsExtension` renamed to
-  `OrderActionsExtension` — the class now fixes both the refund and capture header actions on the
-  order page, not just refund, so the old name undersold its scope.
-
-## [0.17.1] - 2026-09-15
-
-### Fixed
-- `Modules\Core\Payment\Drivers\StripePaymentDriver::createAndConfirm()` only set
-  `automatic_payment_methods` when no `payment_method` was given — the actual checkout flow always
-  sends one, so it was omitted, and Stripe fell back to whatever payment methods are enabled in the
-  Dashboard and demanded a `return_url` on confirm. Fixed by setting `automatic_payment_methods`
-  unconditionally with `allow_redirects: never` — the storefront's Payment Element already restricts
-  itself to `paymentMethodTypes: ['card']`, so this just tells Stripe the same thing server-side,
-  which drops the `return_url` requirement.
 
 ## [0.17.0] - 2026-09-14
 

composer.json

@@ -2,7 +2,7 @@
   "name": "boboko/core",
   "description": "Core module — authentication and shared panel behaviour",
   "type": "library",
-  "version": "0.17.3",
+  "version": "0.17.0",
   "autoload": {
     "psr-4": {
       "Modules\\Core\\": "src/"
@@ -18,7 +18,7 @@
     "lunarphp/search": "*",
     "lunarphp/meilisearch": "*",
     "spatie/laravel-translation-loader": "^2.8",
-    "stripe/stripe-php": "^16.6"
+    "lunarphp/stripe": "^1.5"
   },
   "require-dev": {
     "fakerphp/faker": "^1.23",

config/core.php

@@ -65,4 +65,29 @@ return [
         'return_window_days' => 14,
     ],
 
+    /*
+    |--------------------------------------------------------------------------
+    | Storefront OTP Login
+    |--------------------------------------------------------------------------
+    |
+    | Modules\Core\Auth\Services\UserOtpService's passwordless login.
+    | max_attempts caps how many wrong codes a shopper can guess against ONE
+    | generated code before it's invalidated outright. generation_limit/
+    | generation_decay_minutes cap how often a NEW code can be requested for
+    | the same email — independent of max_attempts, since generating a fresh
+    | code also resets the guess count, so an attempt cap alone doesn't stop
+    | an attacker from just requesting a new code every few tries. This same
+    | limit is also what stands between a malicious/careless caller and
+    | mail-bombing one inbox.
+    |
+    */
+
+    'auth' => [
+        'otp' => [
+            'max_attempts' => 5,
+            'generation_limit' => 3,
+            'generation_decay_minutes' => 10,
+        ],
+    ],
+
 ];

database/migrations/2026_09_03_000001_create_stripe_payment_intents_table.php

@@ -1,46 +0,0 @@
-<?php
-
-use Illuminate\Database\Schema\Blueprint;
-use Illuminate\Support\Facades\Schema;
-use Lunar\Base\Migration;
-
-/**
- * First-party copy of lunarphp/stripe's own create_stripe_payment_intents_table
- * migration (package removed in favour of depending on stripe/stripe-php
- * directly — see Modules\Core\Payment\Support\StripeManager and
- * Modules\Core\Payment\Models\StripePaymentIntent, which replace the
- * package's own classes over this same table). Timestamped to run just
- * before this app's own add_context_to_stripe_payment_intents migration,
- * which already alters this table.
- *
- * Guarded with hasTable(): on any environment that already ran
- * lunarphp/stripe's own copy of this migration before the package was
- * removed, the table already exists — this migration is only the one that
- * actually creates it on a fresh install/database from now on.
- */
-return new class extends Migration
-{
-    public function up(): void
-    {
-        if (Schema::hasTable($this->prefix.'stripe_payment_intents')) {
-            return;
-        }
-
-        Schema::create($this->prefix.'stripe_payment_intents', function (Blueprint $table) {
-            $table->id();
-            $table->foreignId('cart_id')->constrained($this->prefix.'carts');
-            $table->foreignId('order_id')->nullable()->constrained($this->prefix.'orders');
-            $table->string('intent_id')->index();
-            $table->string('status')->nullable();
-            $table->string('event_id')->index()->nullable();
-            $table->timestamp('processing_at')->nullable();
-            $table->timestamp('processed_at')->nullable();
-            $table->timestamps();
-        });
-    }
-
-    public function down(): void
-    {
-        Schema::dropIfExists($this->prefix.'stripe_payment_intents');
-    }
-};

database/migrations/2026_09_14_000001_add_otp_attempts_to_users_table.php

@@ -0,0 +1,30 @@
+<?php
+
+use Illuminate\Database\Migrations\Migration;
+use Illuminate\Database\Schema\Blueprint;
+use Illuminate\Support\Facades\Schema;
+
+/**
+ * Caps brute-forcing a 6-digit OTP code (1M combinations, 10-minute
+ * window, previously uncapped) — see Modules\Core\Auth\Services\
+ * UserOtpService::validate(), which now invalidates the code entirely
+ * (forcing a fresh generateAndSend()) once otp_attempts reaches its max,
+ * rather than leaving a live code guessable indefinitely within its
+ * expiry window.
+ */
+return new class extends Migration
+{
+    public function up(): void
+    {
+        Schema::table('users', function (Blueprint $table) {
+            $table->unsignedTinyInteger('otp_attempts')->default(0)->after('otp_expires_at');
+        });
+    }
+
+    public function down(): void
+    {
+        Schema::table('users', function (Blueprint $table) {
+            $table->dropColumn('otp_attempts');
+        });
+    }
+};

database/migrations/2026_09_15_000001_create_user_sessions_table.php

@@ -0,0 +1,41 @@
+<?php
+
+use Illuminate\Database\Migrations\Migration;
+use Illuminate\Database\Schema\Blueprint;
+use Illuminate\Support\Facades\Schema;
+
+/**
+ * A per-login session registry, independent of the actual session store
+ * driver (SESSION_DRIVER=redis in this app — no "sessions" table to
+ * purge by user_id the way the database driver would allow). Each
+ * successful OTP login (Modules\Core\Auth\Services\UserOtpService::
+ * validate()) records one row here and stamps the token into the
+ * Laravel session payload; Modules\Core\Auth\Http\Middleware\
+ * EnsureSessionNotRevoked checks it on every request. "Logout
+ * everywhere" (Modules\Core\Auth\Services\UserSessionService::
+ * revokeOtherSessions()) is then just marking every OTHER row
+ * revoked_at, no session-store-specific logic anywhere.
+ */
+return new class extends Migration
+{
+    public function up(): void
+    {
+        Schema::create('user_sessions', function (Blueprint $table) {
+            $table->id();
+            $table->foreignId('user_id')->constrained()->cascadeOnDelete();
+            $table->string('token', 64)->unique();
+            $table->string('user_agent')->nullable();
+            $table->string('ip_address', 45)->nullable();
+            $table->timestamp('last_used_at');
+            $table->timestamp('revoked_at')->nullable();
+            $table->timestamps();
+
+            $table->index(['user_id', 'revoked_at']);
+        });
+    }
+
+    public function down(): void
+    {
+        Schema::dropIfExists('user_sessions');
+    }
+};

src/Auth/Events/CustomerLoggedIn.php

@@ -0,0 +1,18 @@
+<?php
+
+namespace Modules\Core\Auth\Events;
+
+use Illuminate\Contracts\Auth\Authenticatable;
+
+/**
+ * Dispatched by Modules\Core\Auth\Services\UserOtpService::validate() on a
+ * successful OTP login — distinct from UserCreated (which only fires for
+ * a genuinely first-time email); this fires on every successful login,
+ * new user or returning one.
+ */
+class CustomerLoggedIn
+{
+    public function __construct(
+        public readonly Authenticatable $user,
+    ) {}
+}

src/Auth/Exceptions/OtpThrottledException.php

@@ -0,0 +1,20 @@
+<?php
+
+namespace Modules\Core\Auth\Exceptions;
+
+use RuntimeException;
+
+/**
+ * Thrown by Modules\Core\Auth\Services\UserOtpService::generateAndSend()
+ * when an email has requested too many codes too quickly — caps both
+ * mail-bombing one inbox and the "just request a fresh code to reset my
+ * guess count" loophole a per-code attempt cap alone doesn't close.
+ */
+class OtpThrottledException extends RuntimeException
+{
+    public function __construct(
+        public readonly int $availableInSeconds,
+    ) {
+        parent::__construct("Too many code requests. Try again in {$availableInSeconds} second(s).");
+    }
+}

src/Auth/Http/Middleware/EnsureSessionNotRevoked.php

@@ -0,0 +1,50 @@
+<?php
+
+namespace Modules\Core\Auth\Http\Middleware;
+
+use Closure;
+use Illuminate\Http\Request;
+use Illuminate\Support\Facades\Auth;
+use Modules\Core\Auth\Services\UserSessionService;
+use Symfony\Component\HttpFoundation\Response;
+
+/**
+ * The enforcement half of the session registry — see
+ * Modules\Core\Auth\Services\UserSessionService's own docblock. Not
+ * auto-registered anywhere (no routes/kernel wiring exist in this
+ * package — see Modules\Core\Customer\Services\CustomerAccountService's
+ * own docblock for why this branch stops at services); a consuming app
+ * adds this to its `web` middleware group (after `auth`) to actually get
+ * "logout everywhere" enforcement.
+ *
+ * A request with no recorded UserSession at all (see
+ * UserSessionService::currentSession()'s own docblock) is let through —
+ * only an EXPLICITLY revoked session is rejected.
+ */
+class EnsureSessionNotRevoked
+{
+    public function __construct(
+        private readonly UserSessionService $sessions,
+    ) {}
+
+    public function handle(Request $request, Closure $next): Response
+    {
+        if (! Auth::check()) {
+            return $next($request);
+        }
+
+        $session = $this->sessions->currentSession();
+
+        if ($session && $session->isRevoked()) {
+            Auth::logout();
+            $request->session()->invalidate();
+            $request->session()->regenerateToken();
+
+            abort(401, 'Your session has been revoked. Please log in again.');
+        }
+
+        $session?->update(['last_used_at' => now()]);
+
+        return $next($request);
+    }
+}

src/Auth/Models/UserSession.php

@@ -0,0 +1,33 @@
+<?php
+
+namespace Modules\Core\Auth\Models;
+
+use Illuminate\Database\Eloquent\Model;
+use Illuminate\Database\Eloquent\Relations\BelongsTo;
+
+/**
+ * One row per login (see Modules\Core\Auth\Services\UserOtpService::
+ * validate()) — see that table's own migration docblock for why this
+ * exists independent of the actual session-store driver.
+ */
+class UserSession extends Model
+{
+    protected $guarded = [];
+
+    protected $casts = [
+        'last_used_at' => 'datetime',
+        'revoked_at' => 'datetime',
+    ];
+
+    public function user(): BelongsTo
+    {
+        $model = config('auth.providers.users.model');
+
+        return $this->belongsTo($model);
+    }
+
+    public function isRevoked(): bool
+    {
+        return $this->revoked_at !== null;
+    }
+}

src/Auth/Services/UserOtpService.php

@@ -2,16 +2,75 @@
 
 namespace Modules\Core\Auth\Services;
 
+use Illuminate\Contracts\Auth\Authenticatable;
+use Illuminate\Http\Request;
+use Illuminate\Support\Facades\Auth;
+use Illuminate\Support\Facades\Event;
 use Illuminate\Support\Facades\Mail;
+use Illuminate\Support\Facades\RateLimiter;
+use Modules\Core\Auth\Events\CustomerLoggedIn;
+use Modules\Core\Auth\Exceptions\OtpThrottledException;
 use Modules\Core\Auth\Mail\UserOtpMail;
 
+/**
+ * The storefront's passwordless login — a shopper supplies only an email
+ * (Shopify-style), gets a 6-digit code, and validate() authenticates the
+ * `web` guard via Auth::login().
+ *
+ * That alone is enough to merge/associate any active guest cart into the
+ * now-known customer — Auth::login() fires Illuminate\Auth\Events\Login,
+ * which Lunar's own Lunar\Listeners\CartSessionAuthListener (registered
+ * unconditionally in LunarServiceProvider::boot(), no opt-in needed)
+ * already listens to, calling CartSession::associate() with
+ * config('lunar.cart.auth_policy') — 'merge' by default, 'override' if a
+ * consumer changes that config. Deliberately no cart-association call
+ * here: doing our own on top would run a SECOND merge attempt with a
+ * hardcoded policy that ignores whatever the consumer configured.
+ *
+ * generateAndSend()'s find-or-create already triggers the full
+ * Customer/User pairing cascade for a genuinely new email — see
+ * Modules\Core\Auth\Events\UserCreated's own docblock and
+ * Modules\Core\Customer\Listeners\CreateCustomerForUser.
+ *
+ * Two independent throttles, both configured under core.auth.otp — see
+ * config/core.php's own comment for why they're separate: max_attempts
+ * caps wrong guesses against ONE code; generation_limit caps how often a
+ * NEW code can be requested for the same email at all (closes both the
+ * "regenerate to reset my guess count" loophole and mail-bombing one
+ * inbox).
+ *
+ * validate() also records a UserSessionService entry for the new login —
+ * see that class's own docblock for the "logout everywhere" registry
+ * this feeds (Modules\Core\Auth\Http\Middleware\EnsureSessionNotRevoked
+ * is the enforcement half; a consuming app must add it to its own
+ * middleware stack). $request is optional purely so this service stays
+ * callable from a context with no HTTP request at all (a console
+ * command, a test) — user-agent/ip are simply not recorded when omitted.
+ */
 class UserOtpService
 {
     private const EXPIRY_MINUTES = 10;
     private const CODE_LENGTH = 6;
 
+    public function __construct(
+        private readonly UserSessionService $sessions,
+    ) {}
+
+    /**
+     * @throws OtpThrottledException if this email has requested too many
+     *   codes within core.auth.otp.generation_decay_minutes
+     */
     public function generateAndSend(string $email): bool
     {
+        $limiterKey = $this->generationLimiterKey($email);
+        $maxGenerations = (int) config('core.auth.otp.generation_limit', 3);
+
+        if (RateLimiter::tooManyAttempts($limiterKey, $maxGenerations)) {
+            throw new OtpThrottledException(RateLimiter::availableIn($limiterKey));
+        }
+
+        RateLimiter::hit($limiterKey, (int) config('core.auth.otp.generation_decay_minutes', 10) * 60);
+
         $model = config('auth.providers.users.model');
         $user = $model::firstOrCreate(['email' => $email]);
 
@@ -19,6 +78,7 @@ class UserOtpService
 
         $user->otp_code = $code;
         $user->otp_expires_at = now()->addMinutes(self::EXPIRY_MINUTES);
+        $user->otp_attempts = 0;
         $user->save();
 
         Mail::to($user->email)->send(new UserOtpMail($user->name ?? $user->email, $code));
@@ -26,23 +86,55 @@ class UserOtpService
         return true;
     }
 
-    public function validate(string $email, string $code)
+    /**
+     * A wrong code counts against core.auth.otp.max_attempts and, once
+     * reached, invalidates the code entirely — the shopper must request
+     * a fresh one via generateAndSend() (itself throttled independently
+     * — see this class's own docblock) rather than being able to keep
+     * guessing against a still-live code for the rest of its 10-minute
+     * expiry window.
+     */
+    public function validate(string $email, string $code, ?Request $request = null): ?Authenticatable
     {
         $model = config('auth.providers.users.model');
         $user = $model::where('email', $email)->first();
 
-        if (! $user) {
+        if (! $user || ! $user->otp_expires_at || now()->isAfter($user->otp_expires_at)) {
             return null;
         }
 
-        if (! $user->otp_expires_at || $user->otp_code != $code || now()->isAfter($user->otp_expires_at)) {
+        if ($user->otp_code != $code) {
+            $user->otp_attempts++;
+
+            if ($user->otp_attempts >= (int) config('core.auth.otp.max_attempts', 5)) {
+                $user->otp_code = null;
+                $user->otp_expires_at = null;
+                $user->otp_attempts = 0;
+            }
+
+            $user->save();
+
             return null;
         }
 
         $user->otp_code = null;
         $user->otp_expires_at = null;
+        $user->otp_attempts = 0;
         $user->save();
 
+        RateLimiter::clear($this->generationLimiterKey($email));
+
+        Auth::login($user);
+
+        $this->sessions->record($user, $request);
+
+        Event::dispatch(new CustomerLoggedIn($user));
+
         return $user;
     }
+
+    private function generationLimiterKey(string $email): string
+    {
+        return 'otp-generate:'.strtolower($email);
+    }
 }

src/Auth/Services/UserSessionService.php

@@ -0,0 +1,105 @@
+<?php
+
+namespace Modules\Core\Auth\Services;
+
+use Illuminate\Contracts\Auth\Authenticatable;
+use Illuminate\Http\Request;
+use Illuminate\Support\Str;
+use Modules\Core\Auth\Models\UserSession;
+
+/**
+ * The record/revoke half of the session registry — see
+ * database/migrations/2026_09_15_000001_create_user_sessions_table.php's
+ * own docblock for why this exists (SESSION_DRIVER=redis in this app has
+ * no "sessions" table to purge by user_id). The enforcement half is
+ * Modules\Core\Auth\Http\Middleware\EnsureSessionNotRevoked, which reads
+ * the token this class stamps into the session payload.
+ */
+class UserSessionService
+{
+    private const SESSION_TOKEN_KEY = 'user_session_token';
+
+    /**
+     * Called once, right after Auth::login() succeeds (see
+     * UserOtpService::validate()) — generates a fresh token, records it,
+     * and stamps it into the CURRENT session payload so
+     * EnsureSessionNotRevoked can look it up on later requests.
+     */
+    public function record(Authenticatable $user, ?Request $request = null): UserSession
+    {
+        $token = Str::random(64);
+
+        $session = UserSession::create([
+            'user_id' => $user->getAuthIdentifier(),
+            'token' => $token,
+            'user_agent' => $request?->userAgent(),
+            'ip_address' => $request?->ip(),
+            'last_used_at' => now(),
+        ]);
+
+        session([self::SESSION_TOKEN_KEY => $token]);
+
+        return $session;
+    }
+
+    /**
+     * Revokes every OTHER active session for $user — the current one
+     * (matched by the token in the CURRENT session payload) is left
+     * alone, matching Laravel's own logoutOtherDevices() semantics
+     * (there just isn't a password to re-verify against here — this is a
+     * passwordless account, so revocation is simply "every row that
+     * isn't the one making this request").
+     *
+     * Known, deliberately accepted gap: this requires only a currently
+     * valid session, not a freshly-completed login — so anyone holding
+     * an already-authenticated session (e.g. someone who sits down at an
+     * account left logged in on a shared/public PC) can use this to
+     * evict the real owner's OTHER sessions just as easily as the real
+     * owner could use it to evict an intruder's. A stricter version would
+     * require a fresh OTP re-verification (e.g. within the last few
+     * minutes) before allowing this call. Left as-is for now — revisit if
+     * this turns out to matter in practice, rather than building
+     * abuse-resistance against a threat model nobody's confirmed is real
+     * for this storefront.
+     */
+    public function revokeOtherSessions(Authenticatable $user): int
+    {
+        $currentToken = session(self::SESSION_TOKEN_KEY);
+
+        return UserSession::query()
+            ->where('user_id', $user->getAuthIdentifier())
+            ->whereNull('revoked_at')
+            ->when($currentToken, fn ($query) => $query->where('token', '!=', $currentToken))
+            ->update(['revoked_at' => now()]);
+    }
+
+    /**
+     * Revokes EVERY session for $user, current one included — for a
+     * "this account may be compromised" response, not a routine logout.
+     */
+    public function revokeAllSessions(Authenticatable $user): int
+    {
+        return UserSession::query()
+            ->where('user_id', $user->getAuthIdentifier())
+            ->whereNull('revoked_at')
+            ->update(['revoked_at' => now()]);
+    }
+
+    /**
+     * @return UserSession|null null if the CURRENT session has no
+     *   recorded token at all (e.g. a session predating this feature, or
+     *   one Auth::login() established outside UserOtpService) — treated
+     *   as valid by EnsureSessionNotRevoked rather than rejected, since
+     *   there's nothing to have been revoked.
+     */
+    public function currentSession(): ?UserSession
+    {
+        $token = session(self::SESSION_TOKEN_KEY);
+
+        if (! $token) {
+            return null;
+        }
+
+        return UserSession::where('token', $token)->first();
+    }
+}

src/CorePlugin.php

@@ -28,7 +28,7 @@ use Modules\Core\Catalog\Filament\Extensions\ValuesRelationManagerExtension;
 use Modules\Core\Localization\Filament\Resources\LanguageLineResource;
 use Modules\Core\Order\Filament\Extensions\OrderItemsTableExtension;
 use Modules\Core\Order\Filament\Extensions\OrderPaymentMethodSummaryExtension;
-use Modules\Core\Order\Filament\Extensions\OrderActionsExtension;
+use Modules\Core\Order\Filament\Extensions\OrderRefundActionsExtension;
 use Modules\Core\Order\Filament\Extensions\OrderTransactionsExtension;
 use Modules\Core\Payment\Filament\Resources\PaymentMethodResource;
 use Modules\Core\Review\Filament\Extensions\ProductResourceExtension;
@@ -70,7 +70,7 @@ class CorePlugin implements Plugin
             ValuesRelationManager::class => ValuesRelationManagerExtension::class,
             ShippingMethodResource::class => ShippingMethodResourceExtension::class,
             ListShippingMethod::class => ShippingMethodListExtension::class,
-            ManageOrder::class => [OrderViewExtension::class, OrderActionsExtension::class, OrderTransactionsExtension::class, OrderPaymentMethodSummaryExtension::class, OrderShipmentsExtension::class],
+            ManageOrder::class => [OrderViewExtension::class, OrderRefundActionsExtension::class, OrderTransactionsExtension::class, OrderPaymentMethodSummaryExtension::class, OrderShipmentsExtension::class],
             OrderItemsTable::class => OrderItemsTableExtension::class,
         ]);
 

src/Customer/Events/CustomerAddressCreated.php

@@ -0,0 +1,22 @@
+<?php
+
+namespace Modules\Core\Customer\Events;
+
+use Illuminate\Contracts\Auth\Authenticatable;
+use Lunar\Models\Address;
+
+/**
+ * Dispatched by Modules\Core\Customer\Services\CustomerAccountService::
+ * createAddress(). $causer is carried explicitly (unlike e.g.
+ * Modules\Core\Payment\Events\PaymentMethodCreated, which is always
+ * staff-caused implicitly) because this write happens on the `web`
+ * guard, not `staff` — a listener logging this needs to know who to
+ * attribute it to without guessing a guard.
+ */
+class CustomerAddressCreated
+{
+    public function __construct(
+        public readonly Address $address,
+        public readonly Authenticatable $causer,
+    ) {}
+}

src/Customer/Events/CustomerAddressDeleted.php

@@ -0,0 +1,17 @@
+<?php
+
+namespace Modules\Core\Customer\Events;
+
+use Illuminate\Contracts\Auth\Authenticatable;
+
+class CustomerAddressDeleted
+{
+    /**
+     * @param  array<string, mixed>  $address  Snapshot of the deleted
+     *   row — already gone from the database by dispatch time.
+     */
+    public function __construct(
+        public readonly array $address,
+        public readonly Authenticatable $causer,
+    ) {}
+}

src/Customer/Events/CustomerAddressUpdated.php

@@ -0,0 +1,19 @@
+<?php
+
+namespace Modules\Core\Customer\Events;
+
+use Illuminate\Contracts\Auth\Authenticatable;
+use Lunar\Models\Address;
+
+class CustomerAddressUpdated
+{
+    /**
+     * @param  array<string, mixed>  $old  Snapshot of the changed
+     *   attributes before the update.
+     */
+    public function __construct(
+        public readonly Address $address,
+        public readonly array $old,
+        public readonly Authenticatable $causer,
+    ) {}
+}

src/Customer/Events/CustomerProfileUpdated.php

@@ -0,0 +1,19 @@
+<?php
+
+namespace Modules\Core\Customer\Events;
+
+use Illuminate\Contracts\Auth\Authenticatable;
+use Modules\Core\Customer\Models\Customer;
+
+class CustomerProfileUpdated
+{
+    /**
+     * @param  array<string, mixed>  $old  Snapshot of the changed
+     *   attributes before the update.
+     */
+    public function __construct(
+        public readonly Customer $customer,
+        public readonly array $old,
+        public readonly Authenticatable $causer,
+    ) {}
+}

src/Customer/Exceptions/AddressNotFoundException.php

@@ -0,0 +1,20 @@
+<?php
+
+namespace Modules\Core\Customer\Exceptions;
+
+use RuntimeException;
+
+/**
+ * Thrown by Modules\Core\Customer\Services\CustomerAccountService when an
+ * address id doesn't belong to the customer making the request — never
+ * a plain 404/ModelNotFoundException, so a storefront can't probe for
+ * another customer's address ids by trying sequential ones and reading
+ * the response shape.
+ */
+class AddressNotFoundException extends RuntimeException
+{
+    public function __construct()
+    {
+        parent::__construct('Address not found.');
+    }
+}

src/Customer/Exceptions/OrderNotFoundException.php

@@ -0,0 +1,19 @@
+<?php
+
+namespace Modules\Core\Customer\Exceptions;
+
+use RuntimeException;
+
+/**
+ * Thrown by Modules\Core\Customer\Services\CustomerAccountService when an
+ * order id doesn't belong to the customer making the request (or isn't
+ * placed yet) — never a plain 404/ModelNotFoundException, so a
+ * storefront can't probe for another customer's order ids.
+ */
+class OrderNotFoundException extends RuntimeException
+{
+    public function __construct()
+    {
+        parent::__construct('Order not found.');
+    }
+}

src/Customer/Listeners/LogCustomerAccountActivity.php

@@ -0,0 +1,61 @@
+<?php
+
+namespace Modules\Core\Customer\Listeners;
+
+use Lunar\Models\Address;
+use Modules\Core\Customer\Events\CustomerAddressCreated;
+use Modules\Core\Customer\Events\CustomerAddressDeleted;
+use Modules\Core\Customer\Events\CustomerAddressUpdated;
+use Modules\Core\Customer\Events\CustomerProfileUpdated;
+use Modules\Core\Logging\ActivityLogService;
+
+/**
+ * Same pattern as Payment\Listeners\LogPaymentMethodActivity — routes
+ * Modules\Core\Customer\Services\CustomerAccountService's own events
+ * through the shared Logging\ActivityLogService, giving every
+ * shopper-initiated address/profile change an audit trail (previously
+ * none existed at all for account self-service writes). $causer is
+ * passed through explicitly on every call, since these events are
+ * `web`-guard-caused, not `staff`-guard — see ActivityLogService's own
+ * docblock for why that parameter exists.
+ */
+class LogCustomerAccountActivity
+{
+    public function __construct(
+        private readonly ActivityLogService $activityLog,
+    ) {}
+
+    public function handleAddressCreated(CustomerAddressCreated $event): void
+    {
+        $this->activityLog->created($event->address, $event->address->getAttributes(), $event->causer);
+    }
+
+    public function handleAddressUpdated(CustomerAddressUpdated $event): void
+    {
+        $this->activityLog->updated(
+            $event->address,
+            $event->old,
+            $event->address->only(array_keys($event->old)),
+            $event->causer,
+        );
+    }
+
+    public function handleAddressDeleted(CustomerAddressDeleted $event): void
+    {
+        $subject = (new Address)->forceFill($event->address);
+        $subject->exists = true;
+        $subject->id = $event->address['id'];
+
+        $this->activityLog->deleted($subject, $event->address, $event->causer);
+    }
+
+    public function handleProfileUpdated(CustomerProfileUpdated $event): void
+    {
+        $this->activityLog->updated(
+            $event->customer,
+            $event->old,
+            $event->customer->only(array_keys($event->old)),
+            $event->causer,
+        );
+    }
+}

src/Customer/Services/CustomerAccountService.php

@@ -0,0 +1,255 @@
+<?php
+
+namespace Modules\Core\Customer\Services;
+
+use Illuminate\Contracts\Auth\Authenticatable;
+use Illuminate\Pagination\LengthAwarePaginator;
+use Illuminate\Support\Arr;
+use Illuminate\Support\Facades\Event;
+use Lunar\Models\Address;
+use Lunar\Models\Order;
+use LogicException;
+use Modules\Core\Customer\Events\CustomerAddressCreated;
+use Modules\Core\Customer\Events\CustomerAddressDeleted;
+use Modules\Core\Customer\Events\CustomerAddressUpdated;
+use Modules\Core\Customer\Events\CustomerProfileUpdated;
+use Modules\Core\Customer\Exceptions\AddressNotFoundException;
+use Modules\Core\Customer\Exceptions\OrderNotFoundException;
+use Modules\Core\Customer\Models\Customer;
+
+/**
+ * The storefront-facing "My Account" API — mirrors Modules\Core\Cart\
+ * Services\CartService's shape, one boboko-owned service a storefront
+ * calls, so Lunar's own Customer/Order/Address models stay an
+ * implementation detail. Every method is scoped to the given
+ * Authenticatable's own Customer::latestCustomer() (see docs/modules.md
+ * "Customer/User Pairing") — there is no method here that accepts a bare
+ * order/address id without also requiring the owning user, precisely so
+ * a controller built on top of this can't accidentally leak one
+ * customer's data to another by trusting a client-supplied id alone.
+ *
+ * $user->latestCustomer() can be null for a User that has no paired
+ * Customer yet (shouldn't happen via the normal OTP-login cascade — see
+ * Modules\Core\Auth\Events\UserCreated — but is defended against anyway,
+ * since nothing stops a User row existing without one, e.g. seeded data)
+ * — every method returns an empty/null result rather than throwing in
+ * that case, since "no customer paired yet" isn't a not-found error, it's
+ * a legitimately empty account.
+ *
+ * Address/profile writes go through an explicit column allowlist
+ * (WRITABLE_ADDRESS_FIELDS/WRITABLE_PROFILE_FIELDS) rather than trusting
+ * Lunar\Models\Address/Customer's own $guarded = [] — that flag makes
+ * every column mass-assignable at the model layer, including
+ * customer_id on addresses, so a caller passing through an unfiltered
+ * request array (a real risk for a storefront controller built directly
+ * against this service) could otherwise reassign an address to a
+ * different customer entirely, or overwrite created_at/id. Arr::only()
+ * silently drops anything not on the allowlist rather than erroring —
+ * this is a safety boundary, not form validation (a storefront still
+ * validates its own request shape before calling this).
+ *
+ * Authorization here IS the ownership scoping itself, not a separate
+ * layer bolted on top — there is deliberately no Laravel Policy/Gate
+ * class for Order/Address, since a policy is meaningless without a
+ * controller calling authorize() against it, and this branch is scoped
+ * to backend services only (no routes/controllers — see the branch's own
+ * commit history). Every public method below takes Authenticatable $user
+ * as a required first argument and resolves everything else (Order,
+ * Address, Customer) strictly through that user's own
+ * latestCustomer() — there is no method that looks anything up by a bare
+ * id alone. A future storefront controller cannot "forget" the
+ * authorization check the way it could with a separate policy class,
+ * because the check IS how every lookup happens; skipping it isn't an
+ * option the method signatures allow.
+ */
+class CustomerAccountService
+{
+    private const WRITABLE_ADDRESS_FIELDS = [
+        'title', 'first_name', 'last_name', 'company_name',
+        'line_one', 'line_two', 'line_three', 'city', 'state', 'postcode',
+        'delivery_instructions', 'contact_email', 'contact_phone',
+        'country_id', 'shipping_default', 'billing_default',
+    ];
+
+    private const WRITABLE_PROFILE_FIELDS = [
+        'title', 'first_name', 'last_name', 'company_name', 'vat_no',
+    ];
+
+    public function customer(Authenticatable $user): ?Customer
+    {
+        /** @var Customer|null */
+        return $user->latestCustomer();
+    }
+
+    /**
+     * Placed orders only (placed_at IS NOT NULL) — a draft/abandoned
+     * order with no placed_at is checkout-in-progress state, not
+     * something that belongs in order history.
+     */
+    public function orders(Authenticatable $user, int $perPage = 15): LengthAwarePaginator
+    {
+        $customer = $this->customer($user);
+
+        if (! $customer) {
+            return new LengthAwarePaginator([], 0, $perPage);
+        }
+
+        return $customer->orders()
+            ->whereNotNull('placed_at')
+            ->latest('placed_at')
+            ->paginate($perPage);
+    }
+
+    /**
+     * @throws OrderNotFoundException if $orderId doesn't belong to this
+     *   customer, or belongs to a draft (never placed) order
+     */
+    public function order(Authenticatable $user, int $orderId): Order
+    {
+        $customer = $this->customer($user);
+
+        $order = $customer
+            ?->orders()
+            ->whereNotNull('placed_at')
+            ->with(['lines', 'shippingAddress', 'billingAddress', 'transactions', 'shipments'])
+            ->find($orderId);
+
+        if (! $order) {
+            throw new OrderNotFoundException;
+        }
+
+        return $order;
+    }
+
+    public function addresses(Authenticatable $user): iterable
+    {
+        $customer = $this->customer($user);
+
+        return $customer?->addresses ?? collect();
+    }
+
+    /**
+     * @param  array<string, mixed>  $data  Any key not in
+     *   WRITABLE_ADDRESS_FIELDS is silently dropped — see this class's
+     *   own docblock.
+     */
+    public function createAddress(Authenticatable $user, array $data): Address
+    {
+        $customer = $this->customerOrFail($user);
+
+        $address = $customer->addresses()->create(Arr::only($data, self::WRITABLE_ADDRESS_FIELDS));
+
+        $this->enforceSingleDefault($customer, $address);
+        $address->refresh();
+
+        Event::dispatch(new CustomerAddressCreated($address, $user));
+
+        return $address;
+    }
+
+    /**
+     * @throws AddressNotFoundException if $addressId doesn't belong to
+     *   this customer
+     */
+    public function updateAddress(Authenticatable $user, int $addressId, array $data): Address
+    {
+        $address = $this->ownedAddress($user, $addressId);
+        $old = $address->only(array_keys(Arr::only($data, self::WRITABLE_ADDRESS_FIELDS)));
+
+        $address->update(Arr::only($data, self::WRITABLE_ADDRESS_FIELDS));
+
+        $this->enforceSingleDefault($address->customer, $address);
+        $address->refresh();
+
+        Event::dispatch(new CustomerAddressUpdated($address, $old, $user));
+
+        return $address;
+    }
+
+    /**
+     * @throws AddressNotFoundException if $addressId doesn't belong to
+     *   this customer
+     */
+    public function deleteAddress(Authenticatable $user, int $addressId): void
+    {
+        $address = $this->ownedAddress($user, $addressId);
+        $snapshot = $address->getAttributes();
+
+        $address->delete();
+
+        Event::dispatch(new CustomerAddressDeleted($snapshot, $user));
+    }
+
+    /**
+     * Lunar has no built-in action enforcing "at most one shipping
+     * default / one billing default per customer" — a raw update() could
+     * otherwise leave two addresses both flagged shipping_default. Runs
+     * after every create/update, unconditionally (cheap — at most two
+     * single-row UPDATEs, only fired when the just-written address
+     * itself is a default), clearing the flag on every OTHER address of
+     * the same customer.
+     */
+    private function enforceSingleDefault(Customer $customer, Address $address): void
+    {
+        if ($address->shipping_default) {
+            $customer->addresses()->where('id', '!=', $address->id)->update(['shipping_default' => false]);
+        }
+
+        if ($address->billing_default) {
+            $customer->addresses()->where('id', '!=', $address->id)->update(['billing_default' => false]);
+        }
+    }
+
+    /**
+     * @throws AddressNotFoundException if $addressId doesn't belong to
+     *   this customer
+     */
+    private function ownedAddress(Authenticatable $user, int $addressId): Address
+    {
+        $customer = $this->customer($user);
+
+        $address = $customer?->addresses()->find($addressId);
+
+        if (! $address) {
+            throw new AddressNotFoundException;
+        }
+
+        return $address;
+    }
+
+    /**
+     * @param  array<string, mixed>  $data  Any key not in
+     *   WRITABLE_PROFILE_FIELDS is silently dropped — see this class's
+     *   own docblock.
+     */
+    public function updateProfile(Authenticatable $user, array $data): Customer
+    {
+        $customer = $this->customerOrFail($user);
+        $old = $customer->only(array_keys(Arr::only($data, self::WRITABLE_PROFILE_FIELDS)));
+
+        $customer->update(Arr::only($data, self::WRITABLE_PROFILE_FIELDS));
+        $customer->refresh();
+
+        Event::dispatch(new CustomerProfileUpdated($customer, $old, $user));
+
+        return $customer;
+    }
+
+    /**
+     * @throws LogicException if $user has no paired Customer at all —
+     *   distinct from AddressNotFoundException/OrderNotFoundException
+     *   (which mean "this id isn't yours"), this means the account
+     *   itself is in an invariant-violating state the normal OTP-login
+     *   cascade should never produce.
+     */
+    private function customerOrFail(Authenticatable $user): Customer
+    {
+        $customer = $this->customer($user);
+
+        if (! $customer) {
+            throw new LogicException('This user has no paired Customer record.');
+        }
+
+        return $customer;
+    }
+}

src/Logging/ActivityLogService.php

@@ -2,25 +2,31 @@
 
 namespace Modules\Core\Logging;
 
+use Illuminate\Contracts\Auth\Authenticatable;
 use Illuminate\Database\Eloquent\Model;
 
 /**
  * Thin wrapper around Spatie Activity Log that standardises the log channel,
- * actor (authenticated staff member), and property shape for all domain events.
+ * actor, and property shape for all domain events.
  *
  * All logs are written to the 'lunar' channel. The subject is always an
- * Eloquent model, and the actor is resolved from the 'staff' guard at call time.
+ * Eloquent model. $causer defaults to the 'staff' guard's current user —
+ * every existing caller of this class is admin-side — but can be passed
+ * explicitly for a non-staff actor (e.g. a customer editing their own
+ * address on the `web` guard — see Modules\Core\Customer\Services\
+ * CustomerAccountService, which passes the acting User rather than
+ * relying on this default resolving to null for a web-guard session).
  */
 class ActivityLogService
 {
     /**
      * Log a creation event. $attributes describes the initial state.
      */
-    public function created(Model $subject, array $attributes): void
+    public function created(Model $subject, array $attributes, ?Authenticatable $causer = null): void
     {
         activity('lunar')
             ->performedOn($subject)
-            ->causedBy(auth('staff')->user())
+            ->causedBy($causer ?? auth('staff')->user())
             ->withProperties(['attributes' => $attributes])
             ->log('created');
     }
@@ -28,11 +34,11 @@ class ActivityLogService
     /**
      * Log an update event. $old holds the previous values, $attributes the new ones.
      */
-    public function updated(Model $subject, array $old, array $attributes): void
+    public function updated(Model $subject, array $old, array $attributes, ?Authenticatable $causer = null): void
     {
         activity('lunar')
             ->performedOn($subject)
-            ->causedBy(auth('staff')->user())
+            ->causedBy($causer ?? auth('staff')->user())
             ->withProperties(['old' => $old, 'attributes' => $attributes])
             ->log('updated');
     }
@@ -40,11 +46,11 @@ class ActivityLogService
     /**
      * Log a failed operation. $attributes provides context (e.g. error message, service).
      */
-    public function failed(Model $subject, array $attributes): void
+    public function failed(Model $subject, array $attributes, ?Authenticatable $causer = null): void
     {
         activity('lunar')
             ->performedOn($subject)
-            ->causedBy(auth('staff')->user())
+            ->causedBy($causer ?? auth('staff')->user())
             ->withProperties(['attributes' => $attributes])
             ->log('failed');
     }
@@ -52,11 +58,11 @@ class ActivityLogService
     /**
      * Log a deletion event. $attributes provides context (e.g. reason, name).
      */
-    public function deleted(Model $subject, array $attributes): void
+    public function deleted(Model $subject, array $attributes, ?Authenticatable $causer = null): void
     {
         activity('lunar')
             ->performedOn($subject)
-            ->causedBy(auth('staff')->user())
+            ->causedBy($causer ?? auth('staff')->user())
             ->withProperties(['attributes' => $attributes])
             ->log('deleted');
     }

src/Order/Filament/Extensions/OrderItemsTableExtension.php

@@ -8,7 +8,7 @@ use Filament\Tables\Table;
 use Lunar\Admin\Support\Extending\BaseExtension;
 
 /**
- * Same fix as OrderActionsExtension, applied to the order lines
+ * Same fix as OrderRefundActionsExtension, applied to the order lines
  * table's "bulk_refund" toolbar action (Lunar\Admin\...\OrderItemsTable::
  * getBulkRefundAction()) — see that class's docblock for the underlying
  * Filament bug (failureNotification()+failure()+halt() never actually

src/Order/Filament/Extensions/OrderRefundActionsExtension.php

@@ -32,6 +32,10 @@ use ReflectionProperty;
  * could return a real, honest failure — see Payment\Support\
  * TransactionDriverAdapter's own docblock for that history.
  *
+ * Fix, for capture: wrap the action's own action() closure so that, on
+ * Halt, we call $action->sendFailureNotification() ourselves before letting
+ * the Halt continue propagating — everything else is untouched.
+ *
  * Fix, for refund: same notification fix, but the action() closure is
  * replaced outright (not wrapped) rather than reused, because refund also
  * needs a "Refund via" driver Select added to the modal (see
@@ -39,28 +43,15 @@ use ReflectionProperty;
  * Payment\Support\TransactionDriverAdapter::refundVia() instead of
  * Lunar\Models\Transaction::refund() — see fixRefundAction()'s own
  * docblock.
- *
- * Fix, for capture: same notification fix, but the action() closure is
- * also replaced outright — the actual call is routed through
- * Payment\Support\TransactionDriverAdapter::capture() instead of
- * Lunar\Models\Transaction::capture() (see fixCaptureAction()), so a
- * manual backoffice capture goes through the app's own payment driver
- * registry and dispatches Payment\Events\PaymentCaptured exactly like a
- * checkout-time capture does — the vendor path resolved
- * Lunar\Facades\Payments (an entirely separate, unused driver registry)
- * and never dispatched that event, which is why Order::status used to
- * stay stuck on 'awaiting_payment' after a manual capture even though
- * Modules\Core\Order\Listeners\ApplyResolvedPaymentStatus now advances it
- * on PaymentCaptured.
  */
-class OrderActionsExtension extends ViewPageExtension
+class OrderRefundActionsExtension extends ViewPageExtension
 {
     public function headerActions(array $actions): array
     {
         return array_map(
             fn (Action $action) => match ($action->getName()) {
                 'refund' => $this->fixRefundAction($action),
-                'capture' => $this->fixCaptureAction($action),
+                'capture' => $this->fixFailureNotification($action),
                 default => $action,
             },
             $actions,
@@ -132,41 +123,6 @@ class OrderActionsExtension extends ViewPageExtension
         });
     }
 
-    /**
-     * Mirrors fixRefundAction()'s notification fix, but for the "amount"
-     * field already on the vendor schema — no extra field needed, since
-     * capture always goes back through the transaction's own original
-     * driver (there's no equivalent to refunding via a different driver).
-     */
-    private function fixCaptureAction(Action $action): Action
-    {
-        return $action->action(function (array $data, Action $action) {
-            $transaction = Transaction::find($data['transaction']);
-
-            if (! $transaction instanceof CoreTransaction) {
-                $action->failureNotification(fn () => Notification::make('capture_failure')->danger()->title('Transaction not found.'))
-                    ->sendFailureNotification();
-
-                throw new Halt;
-            }
-
-            $response = app(TransactionDriverAdapter::class)->capture(
-                $transaction,
-                (int) bcmul((string) $data['amount'], (string) $transaction->order->currency->factor),
-            );
-
-            if (! $response->success) {
-                $action->failureNotification(
-                    fn () => Notification::make('capture_failure')->color('danger')->title($response->message)
-                )->sendFailureNotification();
-
-                throw new Halt;
-            }
-
-            $action->success();
-        });
-    }
-
     /**
      * @return array<string, string>
      */
@@ -207,4 +163,37 @@ class OrderActionsExtension extends ViewPageExtension
 
         return $reflected->getValue($object);
     }
+
+    /**
+     * Wraps the action's own configured action() closure so that, if it
+     * halts (Lunar's closures throw via $action->halt() to signal failure —
+     * see this class's own docblock for why that alone never sends the
+     * notification queued via failureNotification()), we send that
+     * notification ourselves before letting the Halt continue propagating
+     * (still needed — it's what stops callMountedAction() from treating
+     * this as a success and closing the modal/committing the DB transaction).
+     *
+     * $this->evaluate() (not a plain call) matches exactly how Action::call()
+     * itself invokes the closure — Lunar's closures type-hint $data/$record/
+     * $action and rely on Filament's own container-style parameter
+     * resolution, not positional arguments.
+     */
+    private function fixFailureNotification(Action $action): Action
+    {
+        $originalAction = $action->getActionFunction();
+
+        if ($originalAction === null) {
+            return $action;
+        }
+
+        return $action->action(function (array $arguments) use ($action, $originalAction) {
+            try {
+                return $action->evaluate($originalAction, $arguments);
+            } catch (Halt $exception) {
+                $action->sendFailureNotification();
+
+                throw $exception;
+            }
+        });
+    }
 }

src/Order/Listeners/ApplyResolvedPaymentStatus.php

@@ -6,7 +6,6 @@ use Illuminate\Support\Facades\Event;
 use Lunar\Models\Order;
 use Modules\Core\Checkout\Events\OrderPlaced;
 use Modules\Core\Order\Enums\PaymentStatus;
-use Modules\Core\Order\Services\OrderStatusFlow;
 use Modules\Core\Order\Services\OrderStatusWriter;
 use Modules\Core\Order\Support\OrderStatus;
 use Modules\Core\Payment\Events\PaymentAuthorized;
@@ -17,16 +16,13 @@ use Modules\Core\Payment\Events\PaymentRefunded;
  * Registered against PaymentCaptured, PaymentAuthorized, AND
  * PaymentRefunded (see OrderServiceProvider).
  *
- * PaymentCaptured writes both Order::paid/paid_at (via
+ * A capture/authorization only ever writes Order::paid/paid_at (via
- * OrderStatusWriter::markPaid()) AND advances `status` out of
+ * OrderStatusWriter::markPaid()) — never `status`. Confirmed with the
- * 'awaiting_payment' to the next step in the order's flow (see
+ * user: status leaving 'awaiting_payment' is always a staff-driven
- * OrderStatusFlow::nextOptions()) — re-confirmed with the user: a
+ * "Update Status" click, regardless of payment method — no special-casing
- * captured payment, manual or via Stripe's webhook, should never leave an
+ * prepaid vs. cash-on-delivery. A prepaid order briefly sitting at
- * order sitting at 'awaiting_payment'. Only fires when status is still
+ * 'awaiting_payment' with paid = true (until staff notice and advance it)
- * exactly 'awaiting_payment', so a duplicate/delayed capture event never
+ * is expected, not a bug.
- * regresses an order staff already advanced further. PaymentAuthorized
- * only marks paid — an authorization is not yet captured funds, so
- * status stays put until the actual capture.
  *
  * A refund still moves `status` (returned -> refunded/partially_refunded)
  * — refunds are a normal step in Modules\Core\Order\Services\
@@ -48,7 +44,6 @@ class ApplyResolvedPaymentStatus
 {
     public function __construct(
         private readonly OrderStatusWriter $writer,
-        private readonly OrderStatusFlow $flow,
     ) {}
 
     public function handle(PaymentCaptured|PaymentAuthorized|PaymentRefunded $event): void
@@ -71,30 +66,12 @@ class ApplyResolvedPaymentStatus
 
         $this->writer->markPaid($order, $event::class);
 
-        if ($event instanceof PaymentCaptured) {
-            $this->advancePastAwaitingPayment($order, $event);
-        }
-
         if (! $wasPlaced) {
             $order->update(['placed_at' => $order->placed_at ?? now()]);
             Event::dispatch(new OrderPlaced($order));
         }
     }
 
-    private function advancePastAwaitingPayment(Order $order, PaymentCaptured $event): void
-    {
-        if ($order->status !== 'awaiting_payment') {
-            return;
-        }
-
-        $next = $this->flow->nextOptions($order);
-        $target = array_key_first($next);
-
-        if ($target !== null) {
-            $this->writer->write($order, $target, $event::class);
-        }
-    }
-
     /**
      * Requires the refund Transaction row to already exist (Modules\Core\
      * Order\Listeners\RecordPaymentTransaction must run first — see

src/Order/Services/TransactionRecorder.php

@@ -49,8 +49,6 @@ class TransactionRecorder
             'reference' => $result->reference,
             'status' => $result->status->name,
             'notes' => $result->failureReason,
-            'card_type' => $result->meta['card_type'] ?? null,
-            'last_four' => $result->meta['last_four'] ?? null,
             'meta' => $result->meta,
         ]);
     }

src/Payment/Drivers/BankTransferPaymentDriver.php

@@ -22,7 +22,7 @@ use Modules\Core\Payment\Events\PaymentRefunded;
  * chooses this driver explicitly in the refund action, independent of
  * which driver the original payment went through (see
  * Payment\Support\TransactionDriverAdapter::refundVia() and
- * Order\Filament\Extensions\OrderActionsExtension). pay() exists so
+ * Order\Filament\Extensions\OrderRefundActionsExtension). pay() exists so
  * the same driver also covers receiving a payment by bank transfer, but
  * the admin UI for that (bank reference, notes, proof-of-transfer upload)
  * is deliberately not built yet — see the follow-up work tracked from this

src/Payment/Drivers/StripePaymentDriver.php

@@ -4,6 +4,9 @@ namespace Modules\Core\Payment\Drivers;
 
 use Lunar\DataTypes\Price;
 use Lunar\Models\Currency;
+use Lunar\Stripe\Facades\Stripe;
+use Lunar\Stripe\Managers\StripeManager;
+use Lunar\Stripe\Models\StripePaymentIntent;
 use Modules\Core\Payment\Contracts\Configurable;
 use Modules\Core\Payment\Contracts\HandlesPaymentCallback;
 use Modules\Core\Payment\Contracts\SupportsAuthorization;
@@ -23,20 +26,17 @@ use Modules\Core\Payment\Events\PaymentRefundFailed;
 use Modules\Core\Payment\Events\PaymentRefunded;
 use Modules\Core\Payment\Events\PaymentVoidFailed;
 use Modules\Core\Payment\Events\PaymentVoided;
-use Modules\Core\Payment\Models\StripePaymentIntent;
-use Modules\Core\Payment\Support\StripeManager;
 use Stripe\Exception\ApiErrorException;
 use Stripe\PaymentIntent;
 
 /**
  * Talks to Stripe's PaymentIntent API directly — deliberately NOT via
- * Lunar's own checkout flow (lunarphp/stripe, since removed — see
+ * Lunar\Stripe\Facades\Stripe::createIntent()/fetchOrCreateIntent(), which
- * Modules\Core\Payment\Support\StripeManager's own docblock), which took a
+ * take a Lunar\Models\Cart and derive amount/currency from it. Payment
- * Lunar\Models\Cart and derived amount/currency from it. Payment must
+ * must never receive a Cart (see docs/payments.md) — pay()/authorize()
- * never receive a Cart (see docs/payments.md) — pay()/authorize() already
+ * already receive $amount explicitly as their own required Lunar Price
- * receive $amount explicitly as their own required Lunar Price parameter
+ * parameter (see PaymentResult's own docblock), the caller's job to
- * (see PaymentResult's own docblock), the caller's job to assemble, same
+ * assemble, same as every other driver.
- * as every other driver.
  *
  * Every amount that crosses this class's own boundary is converted right
  * there: Lunar's Price -> Stripe's minor-unit int going INTO a gateway
@@ -45,11 +45,12 @@ use Stripe\PaymentIntent;
  * Nothing outside this class ever sees a Stripe-scaled integer.
  *
  * Correlating a later handleCallback() (a separate request — a webhook)
- * back to whatever $context identified this attempt is solved via real
+ * back to whatever $context identified this attempt is solved the same
- * cart_id/order_id columns on Modules\Core\Payment\Models\
+ * way lunarphp/stripe's own StripePaymentType/ProcessStripeWebhook solve
- * StripePaymentIntent (a table this app now owns outright, already shaped
+ * it: real cart_id/order_id columns on Lunar\Stripe\Models\
- * for exactly this), not a generic context blob. See docs/payments.md
+ * StripePaymentIntent (a table already owned by lunarphp/stripe, already
- * "Async resolution" for the full reasoning.
+ * shaped for exactly this), not a generic context blob. See
+ * docs/payments.md "Async resolution" for the full reasoning.
  */
 class StripePaymentDriver implements
     Configurable,
@@ -60,18 +61,16 @@ class StripePaymentDriver implements
     SupportsRefunds,
     HandlesPaymentCallback
 {
-    public function __construct(
-        private readonly StripeManager $stripe,
-    ) {}
-
     /**
-     * Same key StripeManager reads its API key from — no key, no usable
+     * Same key lunarphp/stripe's own StripeManager reads its API key from
-     * driver.
+     * (Stripe::setApiKey(config('services.stripe.key'))) — no key, no
+     * usable driver.
      */
     public function isConfigured(): bool
     {
         return filled(config('services.stripe.key'));
     }
+
     /**
      * Atomic charge — capture_method: automatic. Stripe still frequently
      * confirms into requires_action/requires_confirmation rather than
@@ -101,22 +100,16 @@ class StripePaymentDriver implements
             'currency' => $amount->currency->code,
             'capture_method' => $captureMethod,
             'confirm' => true,
-            // 'never' rather than the client-side paymentMethodTypes: ['card']
-            // restriction alone — the storefront's Payment Element already
-            // excludes every redirect-based method, but without this Stripe
-            // still falls back to whatever's enabled in the Dashboard and
-            // demands a return_url on confirm. Setting this unconditionally
-            // (not only when no payment_method is given) matches the actual
-            // flow: a payment_method is always supplied here.
-            'automatic_payment_methods' => ['enabled' => true, 'allow_redirects' => 'never'],
         ];
 
         if (isset($data['payment_method'])) {
             $params['payment_method'] = $data['payment_method'];
+        } else {
+            $params['automatic_payment_methods'] = ['enabled' => true];
         }
 
         try {
-            $paymentIntent = $this->stripe->getClient()->paymentIntents->create($params);
+            $paymentIntent = Stripe::getClient()->paymentIntents->create($params);
         } catch (ApiErrorException $e) {
             return $this->declined($type, $amount, $e, $context, authorizing: $captureMethod === 'manual');
         }
@@ -130,7 +123,7 @@ class StripePaymentDriver implements
     {
         [$intentModel, $type, $context] = $this->resolveIntentModel($reference, $context, $data['type'] ?? '');
 
-        $paymentIntent = $this->stripe->getClient()->paymentIntents->retrieve($reference);
+        $paymentIntent = Stripe::getClient()->paymentIntents->retrieve($reference);
 
         $authorizing = $paymentIntent->capture_method === PaymentIntent::CAPTURE_METHOD_MANUAL;
 
@@ -138,7 +131,7 @@ class StripePaymentDriver implements
             // automatic capture_method, but Stripe stopped short of
             // capturing (rare, but the API contract allows it) — finish
             // the job pay() started.
-            $paymentIntent = $this->stripe->getClient()->paymentIntents->capture($reference);
+            $paymentIntent = Stripe::getClient()->paymentIntents->capture($reference);
         }
 
         $intentModel?->update(['status' => $paymentIntent->status]);
@@ -153,7 +146,7 @@ class StripePaymentDriver implements
         [$intentModel, $type, $context] = $this->resolveIntentModel($reference, $context);
 
         try {
-            $paymentIntent = $this->stripe->getClient()->paymentIntents->capture($reference, [
+            $paymentIntent = Stripe::getClient()->paymentIntents->capture($reference, [
                 'amount_to_capture' => StripeManager::toStripeAmount($amount->value, $amount->currency),
             ]);
         } catch (ApiErrorException $e) {
@@ -172,7 +165,6 @@ class StripePaymentDriver implements
             reference: $paymentIntent->id,
             amount: $amount,
             raw: $paymentIntent->toArray(),
-            meta: $this->cardMetaFromIntent($paymentIntent),
         );
 
         $paymentIntent->status === PaymentIntent::STATUS_SUCCEEDED
@@ -187,7 +179,7 @@ class StripePaymentDriver implements
         [$intentModel, $type, $context] = $this->resolveIntentModel($reference, $context);
 
         try {
-            $paymentIntent = $this->stripe->getClient()->paymentIntents->cancel($reference);
+            $paymentIntent = Stripe::getClient()->paymentIntents->cancel($reference);
         } catch (ApiErrorException $e) {
             $result = $this->failure($amount, $e, $reference);
             PaymentVoidFailed::dispatch($type, $result, $context);
@@ -218,7 +210,7 @@ class StripePaymentDriver implements
         [$intentModel, $type, $context] = $this->resolveIntentModel($reference, $context);
 
         try {
-            $refund = $this->stripe->getClient()->refunds->create([
+            $refund = Stripe::getClient()->refunds->create([
                 'payment_intent' => $reference,
                 'amount' => StripeManager::toStripeAmount($amount->value, $amount->currency),
             ]);
@@ -255,7 +247,7 @@ class StripePaymentDriver implements
             'order_id' => $context['order_id'] ?? null,
             'status' => $paymentIntent->status,
             'payment_type' => $type,
-            'context' => $context,
+            'context' => json_encode($context),
         ]);
     }
 
@@ -280,10 +272,28 @@ class StripePaymentDriver implements
         return [
             $intentModel,
             $intentModel?->payment_type ?? $typeFallback,
-            $intentModel?->context ?? $context,
+            $this->decodeContext($intentModel) ?? $context,
         ];
     }
 
+    /**
+     * StripePaymentIntent is a vendor model (lunarphp/stripe) with no cast
+     * declared for our own 'context' column (added by boboko-core's own
+     * migration, see database/migrations/..._add_context_to_stripe_
+     * payment_intents.php) — we can't edit the vendor model to add one, so
+     * decode manually here instead of assuming Eloquent already did it.
+     *
+     * @return array<string, mixed>|null
+     */
+    private function decodeContext(?StripePaymentIntent $intentModel): ?array
+    {
+        if (! $intentModel || ! $intentModel->context) {
+            return null;
+        }
+
+        return json_decode($intentModel->context, associative: true) ?: null;
+    }
+
     /**
      * Converts a live Stripe PaymentIntent's own amount/currency back
      * into Lunar's Price — the one place this class reads a Stripe
@@ -325,7 +335,6 @@ class StripePaymentDriver implements
             amount: $amount,
             failureReason: $paymentIntent->last_payment_error->message ?? null,
             raw: $paymentIntent->toArray(),
-            meta: $status === PaymentResultStatus::Pending ? [] : $this->cardMetaFromIntent($paymentIntent),
             continuation: $continuation,
         );
 
@@ -348,40 +357,6 @@ class StripePaymentDriver implements
         return $result;
     }
 
-    /**
-     * card_type/last_four for Modules\Core\Order\Services\
-     * TransactionRecorder to map onto Transaction (see PaymentResult::
-     * $meta's own docblock) — same fields, same source
-     * (payment_method_details on the underlying Charge) as lunarphp/
-     * stripe's own StoreCharges, just reached via latest_charge instead of
-     * an order-level charge list, since this driver has no Order/Cart to
-     * enumerate charges from.
-     *
-     * @return array{card_type?: string, last_four?: string}
-     */
-    private function cardMetaFromIntent(PaymentIntent $paymentIntent): array
-    {
-        $chargeId = $paymentIntent->latest_charge;
-
-        if (blank($chargeId)) {
-            return [];
-        }
-
-        $charge = $this->stripe->getCharge(is_string($chargeId) ? $chargeId : $chargeId->id);
-
-        $paymentType = collect($charge->payment_method_details)->keys()->first();
-        $details = collect($charge->payment_method_details)->first();
-
-        if (blank($details)) {
-            return [];
-        }
-
-        return array_filter([
-            'card_type' => $details['brand'] ?? $paymentType,
-            'last_four' => $details['last4'] ?? null,
-        ], fn ($value) => filled($value));
-    }
-
     private function declined(string $type, Price $amount, ApiErrorException $e, array $context, bool $authorizing): PaymentResult
     {
         $result = $this->failure($amount, $e);

src/Payment/Http/Controllers/StripeWebhookController.php

@@ -9,17 +9,18 @@ use Modules\Core\Payment\Drivers\StripePaymentDriver;
 use Stripe\Webhook;
 
 /**
- * A boboko-owned webhook endpoint for Stripe — never went through Lunar's
+ * A boboko-owned webhook endpoint for Stripe — deliberately NOT
- * own Payments::driver('stripe') flow (the flow StripePaymentDriver was
+ * lunarphp/stripe's own route (vendor/lunarphp/stripe/routes/webhooks.php),
- * built to replace, see that class's own docblock), and lunarphp/stripe
+ * which dispatches into Lunar's own Payments::driver('stripe') flow (the
- * has since been removed entirely (see Modules\Core\Payment\Support\
+ * flow StripePaymentDriver was built to replace, see that class's own
- * StripeManager's own docblock). Signature verification is handled by
+ * docblock). Signature verification is handled by
- * Modules\Core\Payment\Http\Middleware\StripeWebhookMiddleware, registered
+ * Lunar\Stripe\Http\Middleware\StripeWebhookMiddleware, registered on this
- * on this route (see src/Payment/routes/webhooks.php) — pure Stripe SDK
+ * route (see src/Payment/routes/webhooks.php) — pure Stripe SDK
- * verification + event-type filtering. This controller verifies the
+ * verification + event-type filtering, safe to reuse even though this
- * signature again itself (Webhook::constructEvent()) to get the
+ * controller never touches the rest of that vendor package's flow. This
- * constructed Event object — the middleware doesn't stash one anywhere
+ * controller verifies the signature again itself (Webhook::constructEvent())
- * reusable, it only gates the request through.
+ * to get the constructed Event object — the middleware doesn't stash one
+ * anywhere reusable, it only gates the request through.
  *
  * Resolves the driver directly by class, not via
  * Modules\Core\Payment\Services\PaymentDriverRegistry — this endpoint is

src/Payment/Http/Middleware/StripeWebhookMiddleware.php

@@ -1,51 +0,0 @@
-<?php
-
-namespace Modules\Core\Payment\Http\Middleware;
-
-use Closure;
-use Illuminate\Http\Request;
-use Stripe\Exception\SignatureVerificationException;
-use Stripe\Exception\UnexpectedValueException;
-use Stripe\Webhook;
-
-/**
- * First-party replacement for Lunar\Stripe\Http\Middleware\
- * StripeWebhookMiddleware (lunarphp/stripe removed — see
- * Modules\Core\Payment\Support\StripeManager's own docblock). Registered
- * on the same route as before (src/Payment/routes/webhooks.php) purely to
- * gate malformed/irrelevant requests before they reach
- * Modules\Core\Payment\Http\Controllers\StripeWebhookController, which
- * re-verifies the signature itself (see that controller's own docblock)
- * to get the constructed Event object — this duplication predates the
- * package removal and is left unchanged here.
- */
-class StripeWebhookMiddleware
-{
-    public function handle(Request $request, ?Closure $next = null)
-    {
-        $secret = config('services.stripe.webhooks.lunar');
-        $stripeSig = $request->header('Stripe-Signature');
-
-        try {
-            $event = Webhook::constructEvent(
-                $request->getContent(),
-                $stripeSig,
-                $secret
-            );
-        } catch (UnexpectedValueException|SignatureVerificationException $e) {
-            abort(400, $e->getMessage());
-        }
-
-        if (! in_array(
-            $event->type,
-            [
-                'payment_intent.payment_failed',
-                'payment_intent.succeeded',
-            ]
-        )) {
-            return response('', 200);
-        }
-
-        return $next($request);
-    }
-}

src/Payment/Models/StripePaymentIntent.php

@@ -1,32 +0,0 @@
-<?php
-
-namespace Modules\Core\Payment\Models;
-
-use Lunar\Base\BaseModel;
-
-/**
- * First-party replacement for Lunar\Stripe\Models\StripePaymentIntent (the
- * lunarphp/stripe package was removed — see Modules\Core\Payment\Support\
- * StripeManager's own docblock). Same table (lunar_stripe_payment_intents,
- * created by database/migrations/..._create_stripe_payment_intents_table,
- * a first-party copy of the vendor migration), including the app-owned
- * `context`/`payment_type` columns Modules\Core\Payment\Drivers\
- * StripePaymentDriver::handleCallback() needs to recover $context/$type
- * across the separate request a webhook arrives on — see that class's own
- * docblock for "Async resolution".
- *
- * Extends Lunar\Base\BaseModel (from lunarphp/core, unaffected by removing
- * lunarphp/stripe) purely so table-prefix resolution
- * (config('lunar.database.table_prefix')) stays identical to how the
- * vendor model resolved it — this table was created under that prefix.
- */
-class StripePaymentIntent extends BaseModel
-{
-    protected $table = 'stripe_payment_intents';
-
-    protected $guarded = [];
-
-    protected $casts = [
-        'context' => 'array',
-    ];
-}

src/Payment/Support/StripeManager.php

@@ -1,126 +0,0 @@
-<?php
-
-namespace Modules\Core\Payment\Support;
-
-use Lunar\Models\Contracts\Currency as CurrencyContract;
-use Stripe\Charge;
-use Stripe\StripeClient;
-
-/**
- * First-party replacement for Lunar\Stripe\Facades\Stripe +
- * Lunar\Stripe\Managers\StripeManager — lunarphp/stripe was removed once
- * Modules\Core\Payment\Drivers\StripePaymentDriver already replaced every
- * bit of Lunar's own Stripe payment flow (see that class's own docblock);
- * all that remained load-bearing from the package was raw API-client
- * access and amount conversion, neither of which is Lunar-specific. Only
- * the methods StripePaymentDriver actually called are kept — no
- * fetchOrCreateIntent()/cart-bound helpers, which belonged to Lunar's own
- * (unused) checkout flow.
- *
- * getClient()/getCharge() call the Stripe SDK directly rather than going
- * through a facade — StripePaymentDriver resolves this class via the
- * container instead, same as every other dependency it takes.
- */
-class StripeManager
-{
-    public function getClient(): StripeClient
-    {
-        return new StripeClient([
-            'api_key' => config('services.stripe.key'),
-        ]);
-    }
-
-    public function getCharge(string $chargeId): Charge
-    {
-        return $this->getClient()->charges->retrieve($chargeId);
-    }
-
-    /**
-     * Zero-decimal currencies, per Stripe. The amount sent to Stripe is the
-     * major unit amount as-is.
-     *
-     * @see https://docs.stripe.com/currencies#zero-decimal
-     */
-    protected const ZERO_DECIMAL_CURRENCIES = [
-        'bif', 'clp', 'djf', 'gnf', 'jpy', 'kmf', 'krw', 'mga', 'pyg',
-        'rwf', 'ugx', 'vnd', 'vuv', 'xaf', 'xof', 'xpf',
-    ];
-
-    /**
-     * Three-decimal currencies, per Stripe. The amount sent to Stripe is the
-     * major unit amount multiplied by 1000.
-     *
-     * @see https://docs.stripe.com/currencies#three-decimal
-     */
-    protected const THREE_DECIMAL_CURRENCIES = ['bhd', 'jod', 'kwd', 'omr', 'tnd'];
-
-    /**
-     * HUF, TWD and UGX are ISO zero-decimal currencies, but Stripe still
-     * requires amounts to be sent as if they had two decimal places.
-     *
-     * @see https://docs.stripe.com/currencies#special-cases
-     */
-    protected const SPECIAL_ZERO_DECIMAL_CURRENCIES = ['huf', 'twd', 'ugx'];
-
-    /**
-     * Convert a Lunar price value to the amount expected by Stripe.
-     *
-     * Lunar stores prices as integers scaled by `Currency::decimal_places`,
-     * which merchants can set independently of what Stripe expects for a
-     * given currency. This converts back to the major unit amount first,
-     * then re-scales it to whatever sub-unit Stripe requires for the
-     * currency, so the result is correct regardless of how the merchant has
-     * configured `Currency::decimal_places`.
-     *
-     * @see https://docs.stripe.com/currencies
-     */
-    public static function toStripeAmount(int $value, CurrencyContract $currency): int
-    {
-        return self::rescale($value, max($currency->decimal_places, 0), self::stripeDecimalPlaces($currency));
-    }
-
-    /**
-     * Convert an amount received from Stripe back to a Lunar price value,
-     * scaled by `Currency::decimal_places`. Inverse of `toStripeAmount()`.
-     */
-    public static function fromStripeAmount(int $amount, CurrencyContract $currency): int
-    {
-        return self::rescale($amount, self::stripeDecimalPlaces($currency), max($currency->decimal_places, 0));
-    }
-
-    /**
-     * The number of decimal places Stripe expects amounts in for a currency.
-     */
-    protected static function stripeDecimalPlaces(CurrencyContract $currency): int
-    {
-        $code = strtolower($currency->code);
-
-        // UGX is also in the zero-decimal list; the special case takes precedence.
-        if (in_array($code, self::SPECIAL_ZERO_DECIMAL_CURRENCIES, true)) {
-            return 2;
-        }
-
-        if (in_array($code, self::ZERO_DECIMAL_CURRENCIES, true)) {
-            return 0;
-        }
-
-        if (in_array($code, self::THREE_DECIMAL_CURRENCIES, true)) {
-            return 3;
-        }
-
-        return 2;
-    }
-
-    protected static function rescale(int $value, int $fromDecimalPlaces, int $toDecimalPlaces): int
-    {
-        $exponent = $toDecimalPlaces - $fromDecimalPlaces;
-
-        if ($exponent >= 0) {
-            return $value * (10 ** $exponent);
-        }
-
-        $divisor = 10 ** (-$exponent);
-
-        return intdiv(abs($value) + intdiv($divisor, 2), $divisor) * ($value < 0 ? -1 : 1);
-    }
-}

src/Payment/Support/TransactionDriverAdapter.php

@@ -54,7 +54,7 @@ class TransactionDriverAdapter
     /**
      * The PaymentDriverRegistry key $transaction was originally taken
      * through — what refund()/capture() resolve against by default, and
-     * what Order\Filament\Extensions\OrderActionsExtension defaults
+     * what Order\Filament\Extensions\OrderRefundActionsExtension defaults
      * its "Refund via" driver Select to, before an admin overrides it.
      */
     public function driverKeyFor(Transaction $transaction): ?string
@@ -72,7 +72,7 @@ class TransactionDriverAdapter
      * when refunding through the transaction's own original driver.
      *
      * Called directly by Order\Filament\Extensions\
-     * OrderActionsExtension when the admin picks a different driver
+     * OrderRefundActionsExtension when the admin picks a different driver
      * in the refund modal, bypassing Lunar\Models\Transaction::refund()
      * (whose fixed refund(int $amount, $notes = null) signature has no
      * room for a driver override) — see that extension's own docblock.

src/Payment/routes/webhooks.php

@@ -2,8 +2,8 @@
 
 use Illuminate\Foundation\Http\Middleware\VerifyCsrfToken;
 use Illuminate\Support\Facades\Route;
+use Lunar\Stripe\Http\Middleware\StripeWebhookMiddleware;
 use Modules\Core\Payment\Http\Controllers\StripeWebhookController;
-use Modules\Core\Payment\Http\Middleware\StripeWebhookMiddleware;
 
 Route::post(
     config('payment.stripe.webhook_path', 'payments/stripe/webhook'),

src/Providers/CustomerServiceProvider.php

@@ -7,7 +7,12 @@ use Illuminate\Support\ServiceProvider;
 use Lunar\Facades\ModelManifest;
 use Lunar\Models\Contracts\Customer as LunarCustomer;
 use Modules\Core\Auth\Events\UserCreated;
+use Modules\Core\Customer\Events\CustomerAddressCreated;
+use Modules\Core\Customer\Events\CustomerAddressDeleted;
+use Modules\Core\Customer\Events\CustomerAddressUpdated;
+use Modules\Core\Customer\Events\CustomerProfileUpdated;
 use Modules\Core\Customer\Listeners\CreateCustomerForUser;
+use Modules\Core\Customer\Listeners\LogCustomerAccountActivity;
 use Modules\Core\Customer\Models\Customer;
 
 class CustomerServiceProvider extends ServiceProvider
@@ -17,5 +22,10 @@ class CustomerServiceProvider extends ServiceProvider
         ModelManifest::replace(LunarCustomer::class, Customer::class);
 
         Event::listen(UserCreated::class, CreateCustomerForUser::class);
+
+        Event::listen(CustomerAddressCreated::class, [LogCustomerAccountActivity::class, 'handleAddressCreated']);
+        Event::listen(CustomerAddressUpdated::class, [LogCustomerAccountActivity::class, 'handleAddressUpdated']);
+        Event::listen(CustomerAddressDeleted::class, [LogCustomerAccountActivity::class, 'handleAddressDeleted']);
+        Event::listen(CustomerProfileUpdated::class, [LogCustomerAccountActivity::class, 'handleProfileUpdated']);
     }
 }